胸围尺寸尺码对照表,久久99亚洲精品久久久久,无码一区二区,护士sex性hd医生性生话

Application of ultrasonic cleaning in bearing industry

Cleaning products: all kinds of bearing parts

Cleaning material:
Dust, grease etc.
Cleaning requirements:
In the case without the use of CFCs, from stainless steel bearing clearance of grease and oil can reach the past commonly used cleaning solution has the same cleanliness.
Previous cleaning method:
Solvent or steam cleaning with three chlorine ethane
Recommended processing method:


- 66 C of hot water inside, with a supersonic overflow rinse for 90 seconds, the flow rate of 0.3GPM, sewage into the separation tank can cause dirt or hydrocarbons and water.
- at 71 C of hot water, three minutes of 3 minutes, with a flow rate of 1.5GPM.
- with air knife, and then use a hot air dryer for drying, drying temperature of 116 degrees C
Cleaning system:
The continuous treatment and cleaning equipment for the water - water - semi - agent or with a drier
Technological advantages:
- the ability to enhance the cleaning ion and organic matter.
- no need to change the oil or lubricant used in the manufacturing process.
- better process control, simple processing techniques, no complex monitoring
- benefit of environmental protection - the separation of organic dirt and hydrocarbons from sewage, and the effective maintenance of the equipment